Brok 2″ Shank Ball Mount with Pin Stop

Description

Description

Universal: The ball mount will accept all hitch balls and has a 2-inch drop.

One Wrench Operation: Using bROK’s “pin stop” design, only one wrench is required to tighten hex shaped hitch balls.

Strong: Durable welded and forged steel ball mount.

The bROK 2” Shank Ball Mount incorporates “pin stop” technology to enable one wrench to tighten bROK and hex shaped hitch balls. A 2-in drop from the top of your receiver aids in leveling your trailer while towing. Constructed with welded steel and a black powder coat finish for years of service. The 2-in shank accommodates all class III-IV receivers, a 5/8-in hole for receiver pin or lock and a 1-in hole for the hitch ball Shank.

2″ Drop Specifications:

• Length – 12.5″
• Height – 2.5″
• Width – 3″
• Class – III / IV
• Receiver Opening – 2″
• Capacity GTW – 6000lbs.
• Capacity TW – 600lbs.
• Drop – 2″
• Rise – 0.75″
• Ball Hole Diameter – 1″
• Pin Hole Diameter – 0.62″
• One Wrench to Tighten – Yes

3″ Drop Specifications:

• Length – 13.5″
• Height – 2.5″
• Width – 4.25″
• Class – III / IV
• Receiver Opening – 2″
• Capacity GTW – 5000lbs.
• Capacity TW – 500lbs.
• Drop – 3″
• Rise – 1.75″
• Ball Hole Diameter – 1″
• Pin Hole Diameter – 0.62″
• One Wrench to Tighten – Yes

5″ Drop Specifications:

• Length – 15″
• Height – 2.5″
• Width – 6.5″
• Class – III / IV
• Receiver Opening – 2″
• Capacity GTW – 5000lbs.
• Capacity TW – 500lbs.
• Drop – 5″
• Rise – 3.75″
• Ball Hole Diameter – 1″
• Pin Hole Diameter – 0.62″
• One Wrench to Tighten – Yes

8″ Drop Specifications:

• Length – 13.5″
• Height – 2.5″
• Width – 9.5″
• Class – III / IV
• Receiver Opening – 2″
• Capacity GTW – 5000lbs.
• Capacity TW – 500lbs.
• Drop – 8″
• Rise – 6.75″
• Ball Hole Diameter – 1″
• Pin Hole Diameter – 0.62″
• One Wrench to Tighten – Yes

Installation NotesInstallation Difficulty:Level 1BeginnerParts Included

• Ball Mount