Description
Jamar Performance Hydraulic Brake Park Lock. Once Installed Simply Press The Brake Pedal Down Then Push And Hold Down The Park Lock Button While Releasing The Brake Pedal. This Is A Manual Push Button Hydraulic Lock Using The Line Pressure To Hold The Brakes Locked In Place. This Should Not Be Used As A Emergency Brake Lock, Most Emergency Brakes Are Cable Controlled.
The Jamar Park Lock Must Be Installed In The Brake Line Between The Master Cylinder And The Wheels To Be Locked. The Lower Hole On The End Of The Park Lock Is The Inlet Port (From The Master Cylinder) And The Upper Hole On The End Of The Park Lock Is The Outlet Port (To The Wheels To Be Locked).
Install The Park Lock In Your Vehicle So It Is Easily Reached. The Two Holes On The Side Of The Park Lock Are For Mounting Purposes. The Park Lock Should Be Mounted Solid To Prevent Movement And To Avoid Damage To The Brake Lines And Fittings.
After Installing The Park Lock, Bleed Your Brake System Of All Air In The Lines. DO NOT Push Down On The Knob To Help In Bleeding. This Will Not Help.
To Operate The Park Lock, Step On The Foot Brake Then Push Down On The Knob. Let Off The Foot Brake And It Should Be Locked. To Release The Park Lock, Step On The Brake And It Will Automatically Release.
The Jamar Park Lock Is Designed To Hold A Hydraulic Brake System.
Reviews
There are no reviews yet.